Tried the old rope-and-biner trick vs a proper stage harness strap for hanging a pump in a wet well, no contest | Commercial Divers - Freelance Forum - The Community for Independent Professionals
Tried the old rope-and-biner trick vs a proper stage harness strap for hanging a pump in a wet well, no contest
Last month we were pulling a 4 inch submersible out of a wet well down at the plant off Route 9, and the rigging got ugly fast. First go I used the old rope and carabiner setup like I always did, and the pump kept spinning and swinging into the wall every time we bumped it. Switched to a proper stage harness strap with a fixed pick point, and the thing hung dead straight and came up in one smooth pull. The difference was where the load sat. With the rope the pump's weight was fighting the corner of the well, but the harness put the pick point right over the center of the pump. Maybe saved us ten minutes on that pull, and my back felt it less the next morning. Has anyone found a strap setup that works better for tight wet wells, or is the harness pretty much the go to?