Rant: a boom pin stuck on my old Grove took me 6 hours in Bakersfield | Crane Operators - Freelance Forum - The Community for Independent Professionals
Rant: a boom pin stuck on my old Grove took me 6 hours in Bakersfield
I figured it would take maybe 45 minutes, but that pin was seized so bad we went through two spray cans of penetrating oil before it finally let go, so has anyone found a trick that keeps those pins from rusting up in the first place?
You said the pin was "seized so bad" and you want a trick to stop it from rusting in the first place. Truth is, there is no trick that beats a stuck pin, because those pins rust from the inside out where no spray can reach. Grease the pin and it just traps grit and moisture in the bore, which makes things worse over time. The real fix is to pull them on a schedule and wire wheel the bore, not spray something on and hope. Six hours in Bakersfield heat is a rough day, but a can of oil is not going to save you from that job, it just moves it to next year. Keep a brass drift and a real hammer in the truck instead.